You know, I donβt think people really appreciate how useful tables are Hereβs how to build one: 1. Buy a 2in.x4ft. 1/2 inch thick Peice of finished wood 2. Buy a 16in.x16in. 3/4 inch thick peice of finished wood 3. Decide how tall you want the table (22-32 inch height recommended) 4. Cut your 2in.x4ft. 1/2 inch thick Peice of finished wood into 4 pieces that are the length of your planned table height to make table legs 5. Buy some 1.5 inch Philips head screws 6. Line up your table legs to your 16in.x16in. In the corners 7. Mark where the screws should go, on your 16in.x16in. Piece of wood above where the legs are (2 screws per table leg) 8. Take the legs out 9. Hammer a screw to make a little dot on each screw marking 10. Clamp your 16in.x16in. Wood to a work surface and make sure your table legs are being pressed against the floor when you line them up with the other peice of wood 11. Using a drill or screwdriver, screw your screws into the places you need to while keeping your drill/screwdriver vertically straight and apply constant force to the back of your drill/screwdriver while screwing the screw in 11. Repeat for every leg Your table is now done!!!! 12. (Optional) paint your table 13. If you painted your table, spray with a clear acrylic coating like spray on mod pudge
15 Comments
γγΌγΎγγγΌ
Yes
There was no foul π just another day in the office for Curflop
Lukas better
Luka better
Luka tha goatππ
Halleluka
Gave bro too much space
60 point man luka
Luka magic
Luka the father of devin booker
Luka is daddy luka is goated
Act like a kid ππ
Steph is OP
You know, I donβt think people really appreciate how useful tables are
Hereβs how to build one:
1. Buy a 2in.x4ft. 1/2 inch thick Peice of finished wood
2. Buy a 16in.x16in. 3/4 inch thick peice of finished wood
3. Decide how tall you want the table (22-32 inch height recommended)
4. Cut your 2in.x4ft. 1/2 inch thick Peice of finished wood into 4 pieces that are the length of your planned table height to make table legs
5. Buy some 1.5 inch Philips head screws
6. Line up your table legs to your 16in.x16in. In the corners
7. Mark where the screws should go, on your 16in.x16in. Piece of wood above where the legs are (2 screws per table leg)
8. Take the legs out
9. Hammer a screw to make a little dot on each screw marking
10. Clamp your 16in.x16in. Wood to a work surface and make sure your table legs are being pressed against the floor when you line them up with the other peice of wood
11. Using a drill or screwdriver, screw your screws into the places you need to while keeping your drill/screwdriver vertically straight and apply constant force to the back of your drill/screwdriver while screwing the screw in
11. Repeat for every leg
Your table is now done!!!!
12. (Optional) paint your table
13. If you painted your table, spray with a clear acrylic coating like spray on mod pudge
Hope you liked this table recipe!!!!!!!!